FDA-cleared profile

NemoScan

Software Nemotec S.L. · CBCT · FDA-cleared (510(k))

NemoScan supports dental implantology by segmenting and transferring anatomy from CT or cone-beam CT images for implant and surgical planning.

Clinical role
Dental image visualization, segmentation, measurement, implant planning, or surgical-guide planning support.
Images and patients
CBCT · Dental/Maxillofacial
Key limitation
Use the exact cleared version and supported image inputs. Segmentation and implant-planning outputs require dentist or surgeon confirmation and do not replace clinical examination or surgical judgment.

Overview status: Field-derived fact summary This section is assembled from the sourced field records below; it is not a source-reviewed editorial overview.

Report a correction
Clinical details Purpose, workflow fit, evidence, and safety record

Workflow navigation pilot

Workflow role has not yet been reviewed for this navigation pilot.

A tag identifies a documented role; it does not establish compatibility or local acceptance. Methods and sources

  • Imaging and anatomyCBCT · Dental/Maxillofacial
  • Workflow roleDental image visualization, segmentation, measurement, implant planning, or surgical-guide planning support.
  • Required inputSupported dental CT, cone-beam CT, panoramic, cephalometric, or intraoral radiographic data.
  • Output and human actionThree-dimensional models, measurements, implant or canal planning views, surgical-guide inputs, and reports for professional review.

Evidence context

Evidence context not reviewed for this FDA record.

Public-label constraints

Label constraints have not been reviewed for this exact FDA record. Unknown is not all ages or evidence of unsuitability.

Public-label constraints, not patient-level eligibility or a medical recommendation. Training and evaluation populations are separate. Read the original labeling and confirm the exact release and protocol.

Purpose
NemoScan supports dental implantology by segmenting and transferring anatomy from CT or cone-beam CT images for implant and surgical planning.
  • Exact FDA submission
  • Checked 2026-09-03
Workflow role
Dental image visualization, segmentation, measurement, implant planning, or surgical-guide planning support.
  • Exact FDA submission
  • Checked 2026-09-03
Required input
Supported dental CT, cone-beam CT, panoramic, cephalometric, or intraoral radiographic data.
  • Exact FDA submission
  • Checked 2026-09-03
Output and clinician action
Three-dimensional models, measurements, implant or canal planning views, surgical-guide inputs, and reports for professional review.
  • Exact FDA submission
  • Checked 2026-09-03
Care setting
Dental, oral and maxillofacial, or hospital surgical-planning environments.
  • Exact FDA submission
  • Checked 2026-09-03
Intended users
Qualified dentists, dental radiologists, oral and maxillofacial surgeons, and trained dental imaging staff.
  • Exact FDA submission
  • Checked 2026-09-03
Limitations
Use the exact cleared version and supported image inputs. Segmentation and implant-planning outputs require dentist or surgeon confirmation and do not replace clinical examination or surgical judgment.
  • Exact FDA submission
  • Checked 2026-09-03
Evidence summary
K192571 reports dental image segmentation, planning, visualization, and software validation for implantology. The public FDA summary does not establish a universal clinical-outcome or diagnostic-performance metric, and later NemoScan family material must not be assumed to describe this version.
  • Exact FDA submission
  • Checked 2026-09-03

Evidence

Performance evidence

Metrics are shown only when they are tied to a source, endpoint, population, and tested product version. Candidate literature without exact product and version linkage is not shown as product evidence.

Evidence summary
K192571 reports dental image segmentation, planning, visualization, and software validation for implantology. The public FDA summary does not establish a universal clinical-outcome or diagnostic-performance metric, and later NemoScan family material must not be assumed to describe this version.
  • FDA source
  • Exact FDA submission
  • Checked 2026-09-03
Reported sensitivity
Not applicable
  • Not applicable
  • Not applicable
  • Checked 2026-09-03

Sensitivity is not the primary endpoint for this system, reconstruction, segmentation, guidance, or quantitative function. Use the task-specific evidence below.

Reported specificity
Not applicable
  • Not applicable
  • Not applicable
  • Checked 2026-09-03

Specificity is not the primary endpoint for this system, reconstruction, segmentation, guidance, or quantitative function. Use the task-specific evidence below.

No contextualized exact-version metric has completed evidence review. Regulatory-document values, when available, are shown above with their limitations.

K192571 FDA performance package for NemoScan

  • DesignManufacturer dental image segmentation, visualization, implant-planning, and software validation
  • PopulationDental CT or CBCT implant-planning workflows
  • Scopeexact submission
  • Tested versionNemoScan
  • IndependenceSponsor or vendor study

K192571

Manufacturer evidence submitted for FDA clearance or approval; local clinical, technical, and workflow acceptance remains necessary.

2 unlinked candidate evidence records are retained for source review and excluded from this evidence display.

Safety and lifecycle

Postmarket record

Recall and adverse-event records are shown only after product matching. Adverse-event reports do not establish incidence or causality.

Postmarket safety review
The 2026-09-02 openFDA device-recall snapshot contained no record matched to K192571 by exact submission identifier. This does not exclude product-family, later, or adverse-event information.
  • Public source
  • Exact FDA submission
  • Checked 2026-09-03

Exact-identifier review does not prove absence of all product-family safety signals.

Pricing & contracts Public price, contract terms, and reimbursement

Price not public here; enter your quote

Not publicly available: Reviewed sources do not publish an exact-product procurement price with a stated offer scope.

Reimbursement

Reimbursement
No separate named-product Medicare payment was identified in the reviewed CMS coverage material. Evaluate the product within the applicable imaging, procedural, or surgical service line and verify payer, site-of-service, and coding assumptions independently.
  • Service-level, not product-specific
  • Checked 2026-09-03

No product-specific code

No separate named-product payment identified in reviewed public material

Centers for Medicare & Medicaid Services · United States

Build a local total-cost and value model; do not infer reimbursement from FDA clearance or approval.

IT implementation Deployment, interfaces, data handling, and support

System and version relationships

Match the AI release, system build, configuration and region. Source documentation does not establish acceptance of an installed system.

No specific system/version pairing has completed review for this FDA record. A broad DICOM or product-family statement does not establish a named viewer build's support.

Review Merge, Visage, Sectra, AGFA and IntelePACS context

Integration chain: evidence at each hop

Public source context, not tested interoperability. Each hop needs its own release/configuration evidence. Missing or unavailable routes are not documented incompatibility. All local tests are planned, not passed; no installed-system acceptance is recorded.

Acquisition/source → routing → AI processing → returned objects → viewer/worklist/report → support owner

No specific route context has been source-reviewed for this record. Obtain both endpoint builds and documents; this is not a finding of incompatibility.

  1. Acquisition/source

    Source context, not route validation: Supported dental CT, cone-beam CT, panoramic, cephalometric, or intraoral radiographic data.

    Scope: Exact FDA submission.

    Confirm scanner/model, protocol, series completeness and both software builds.

    Field checked 2026-09-03 · K192571 FDA decision source

  2. Routing

    Source context, not route validation: DICOM import and export to dental workstations, PACS, laboratory, or guide-manufacturing workflows; validate patient identity, orientation, voxel geometry, measurements, and export.

    Scope: Exact FDA submission.

    Name gateways, destinations, transfer rules and failure visibility; a DICOM statement does not prove a route.

    Field checked 2026-09-03 · K192571 FDA decision source

  3. AI processing

    Source context, not route validation: Release-specific dental imaging software on a supported workstation or connected planning environment.

    Scope: Exact FDA submission.

    Confirm processing location, queue ownership, exclusions and exact AI build.

    Field checked 2026-09-03 · K192571 FDA decision source

  4. Returned objects

    Source context, not route validation: Three-dimensional models, measurements, implant or canal planning views, surgical-guide inputs, and reports for professional review.

    Scope: Exact FDA submission.

    Confirm object classes, units, references and whether findings, overlays or measurements reach their intended destination.

    Field checked 2026-09-03 · K192571 FDA decision source

  5. Viewer/worklist/report

    Unresolved route: Three-dimensional models, measurements, implant or canal planning views, surgical-guide inputs, and reports for professional review.

    Scope: Exact FDA submission.

    Confirm the named viewer/worklist/report build, display behavior and report transfer. Output support alone does not establish this endpoint. The displayed source describes output, not validated end-to-end delivery.

    Field checked 2026-09-03 · K192571 FDA decision source

  6. Support owner

    Unresolved route: Not established for the exact route.

    Scope: Scope not established.

    Name the local, platform and AI supplier support owners and escalation path.

Planned local route tests

No tests below have been performed or accepted.

  1. Patient/study identity (planned). Use approved non-patient test data to verify identifiers, accession and result-to-study linkage at every hop.
  2. Study completeness (planned). Test missing views/series, partial transfer, late arrivals, priors and unsupported acquisition inputs; confirm explicit refusal or fallback.
  3. Ordering and duplicates (planned). Send out-of-order, repeated and corrected studies; verify worklist order, deduplication and no misleading stale results.
  4. Report transfer (planned). Verify output object types, annotations, units, report content, destination and availability of original images.
  5. Access (planned). Verify authorized roles, audit trail, denied access and support ownership at each destination.
  6. Latency and failures (planned). Agree a workload and turnaround target; test queues, timeouts, missing results and fallback reading.
  7. Updates and rollback (planned). Define version change control, revalidation triggers, stop-use criteria and a tested rollback route.

Local implementation checklist

Agree the evidence and acceptance owner with your team and suppliers. Checkmarks apply to this page only and are not acceptance receipts.

Open the printable evaluation checklist

Deployment
Release-specific dental imaging software on a supported workstation or connected planning environment.
  • Exact FDA submission
  • Checked 2026-09-03
Integration
DICOM import and export to dental workstations, PACS, laboratory, or guide-manufacturing workflows; validate patient identity, orientation, voxel geometry, measurements, and export.
  • Exact FDA submission
  • Checked 2026-09-03
Security
Software Nemotec, S.L. hosts its RINA ISO/IEC 27001:2022 certificate (first issue 2023-03-31, revision 2025-04-01, stated expiry 2026-03-30; no renewal copy located as of 2026-10-27) covering information security management for the design, development, manufacture, installation, training, technical support and distribution of planning software for dental applications.
  • Product family
  • Checked 2026-10-27

Certificate PDF read on the owning domain (nemotec.com). The hosted certificate states an expiry date of 2026-03-30 and no renewal copy was located; validity is subject to periodic RINA audits. Scope is planning software for dental applications, which covers NemoScan.

Training
Only qualified dentists, dental radiologists, oral and maxillofacial surgeons, and trained dental imaging staff should operate or interpret the product. Local onboarding should cover the exact release, supported population, limitations, failure examples, escalation, downtime, and competency documentation.
  • Exact FDA submission
  • Checked 2026-09-03
Monitoring
Monitor by exact hardware, software, model, and algorithm version; patient population; anatomy; protocol; operator; input quality; output edits or overrides; failed studies; repeat acquisition or rework; downstream impact; downtime; incidents; recalls; and updates. Track these product-specific limits: Use the exact cleared version and supported image inputs. Segmentation and implant-planning outputs require dentist or surgeon confirmation and do not replace clinical examination or surgical judgment.
  • Exact FDA submission
  • Checked 2026-09-03

Release and scope verification

Map the installed model, build, options, population, anatomy, inputs, outputs, and enabled AI functions to K192571 before acceptance.

exact submission · checked 2026-09-03

Later product-family features are not evidence that this cleared release includes them.

Interoperability acceptance

DICOM import and export to dental workstations, PACS, laboratory, or guide-manufacturing workflows; validate patient identity, orientation, voxel geometry, measurements, and export.

exact submission · checked 2026-09-03

Test representative identifiers, orientation, geometry, measurements, units, routing, failure handling, and round trips locally. The capability is derived from the exact FDA workflow and still requires local acceptance testing.

Clinical acceptance

Use a signed local test set for the supported population and workflow. Include common and difficult cases, exclusions, acquisition variation, failed or low-quality inputs, reviewer overrides, and downstream effects. Use the exact cleared version and supported image inputs. Segmentation and implant-planning outputs require dentist or surgeon confirmation and do not replace clinical examination or surgical judgment.

exact submission · checked 2026-09-03

Define stop-use, escalation, rollback, and revalidation triggers before production use.

Economic evaluation

Model capital and recurring cost against net staff time after review, throughput, repeat imaging or rework, room time, consumables, infrastructure, training, service, downtime, upgrade, and replacement costs.

product family · checked 2026-09-03

No exact-product price was found in the reviewed public material; vendor productivity claims are scenario inputs, not guaranteed local savings.

Lifecycle monitoring

Monitor by exact hardware, software, model, and algorithm version; patient population; anatomy; protocol; operator; input quality; output edits or overrides; failed studies; repeat acquisition or rework; downstream impact; downtime; incidents; recalls; and updates. Track these product-specific limits: Use the exact cleared version and supported image inputs. Segmentation and implant-planning outputs require dentist or surgeon confirmation and do not replace clinical examination or surgical judgment.

exact submission · checked 2026-09-03

Revalidate after material software, hardware, model, protocol, interface, or clinical-policy changes. The capability is derived from the exact FDA workflow and still requires local acceptance testing.

Sources & review details FDA identity, research record, source ledger, and history

Regulatory identity

FDA record and catalog context

The FDA listing establishes the regulatory identity. It does not by itself establish local workflow fit, pricing, security, or performance in your environment.

FDA submission
K192571
  • FDA source
  • Exact FDA submission
  • Checked 2026-08-31
Modality
CBCT
  • FDA source
  • Exact FDA submission
  • Checked 2026-09-03
Anatomy
Dental/Maxillofacial
  • FDA source
  • Exact FDA submission
  • Checked 2026-09-03
Clearance type
510(k)
  • FDA source
  • Exact FDA submission
  • Checked 2026-08-31
Decision date
2019-12-11
  • FDA source
  • Exact FDA submission
  • Checked 2026-08-31
FDA status
FDA-cleared
  • FDA source
  • Exact FDA submission
  • Checked 2026-08-31

Research record

What has been checked

This audit distinguishes completed source review from fields that have not yet been researched.

Human reviewedStatus
2026-09-04Last searched
25Fields reviewed
10Source classes checked
2Awaiting review PubMed leads
0Awaiting review trial leads
0Unreviewed FDA recall leads

Recovered from the prior exact-submission extraction and normalized under the current provenance rules. Exact FDA decision materials were reviewed for identity, indication, users, workflow, limitations, and submitted performance. Current vendor material is labeled product-family context where it does not establish the exact release. PubMed and ClinicalTrials.gov results are retained as candidate evidence with version applicability pending; CMS reimbursement context and exact-identifier openFDA postmarket results were also checked. Pricing, final security architecture, contracted services, enabled options, and local interoperability remain organization-specific evidence. Automated exact-name discovery found 2 PubMed and 0 ClinicalTrials.gov candidate records. Candidates require human product and version matching; zero candidates is not evidence that no studies exist. Native FDA recall identifiers produced 0 postmarket candidate records; 0 have been reviewed (0 published, 0 rejected) and 0 remain unreviewed.

Candidate leads remain unpublished until a human confirms the exact product and tested version.

Source classes: fda ai list, fda decision summary, fda decision material, peer reviewed literature, clinical trial registry, reimbursement policy, fda device recall, pubmed, clinical trials, openfda device recall

Field review details

Recorded state, verification date, notes and sources for fields without a publishable value. Conflicting records stay explicitly unsettled here; no plain settled value is shown for them.

  • Public pricing: Not publicly available - checked 2026-09-03 - Exact FDA submission

    No public list price for the exact cleared configuration was found. Obtain a written quote separating hardware or license basis, implementation, interfaces, infrastructure, training, service, upgrades, renewal, consumables, and exit costs.

  • Pricing model: Not yet reviewed
  • Setup and integration fees: Not yet reviewed
  • Recurring fees: Not yet reviewed
  • Minimum commitment: Not yet reviewed
  • Contract duration: Not yet reviewed
  • Renewal terms: Not yet reviewed
  • Cancellation terms: Not yet reviewed
  • Support and service terms: Not yet reviewed
  • Trial or pilot terms: Not yet reviewed
  • Data hosting location: Not yet reviewed
  • Data retention: Not yet reviewed
  • Documented data use: Not yet reviewed
  • Hardware requirements: Not yet reviewed
  • Network requirements: Not yet reviewed
  • Identity and access: Not yet reviewed
  • Installation timeline: Not yet reviewed

9 sources - 2 history items

Source ledger

  1. K192571 FDA decision source

    U.S. Food and Drug Administration - Accessed 2026-08-31

    Scope: regulatoryIdentity, purpose, modality, anatomy

  2. Artificial Intelligence-Enabled Medical Devices

    U.S. Food and Drug Administration - Accessed 2026-08-31

    Scope: regulatoryIdentity, modalityContext

  3. PubMed biomedical literature index

    U.S. National Library of Medicine - Accessed 2026-09-01

    Scope: evidenceDiscovery

  4. ClinicalTrials.gov study registry

    U.S. National Library of Medicine - Accessed 2026-09-01

    Scope: evidenceDiscovery, studyStatus

  5. Medicare Coverage Database

    Centers for Medicare & Medicaid Services - Accessed 2026-09-01

    Scope: coverage, codingContext

  6. openFDA Device Recall API

    U.S. Food and Drug Administration - Accessed 2026-09-02

    Scope: recallDiscovery, nativeSubmissionMatching

  7. An In Vitro Model to Evaluate the Accuracy of Guided Implant Placement Based on the Surgeon's Experience.

    U.S. National Library of Medicine - Accessed 2026-09-03

    Scope: evidenceStudies, productFamilyContext, evidenceDiscovery

  8. Clinical accuracy of three intraoral scanners for determining an increased vertical dimension of occlusion: A pilot study.

    U.S. National Library of Medicine - Accessed 2026-09-03

    Scope: evidenceStudies, productFamilyContext, evidenceDiscovery

  9. Software Nemotec: ISO/IEC 27001:2022 Certificate (RINA)

    Software Nemotec - Accessed 2026-10-27

    Scope: security

Research history

  1. K192571 FDA decision

    Regulatory record

    510(k)

  2. Source-review record updated

    Research record

    human reviewed

Alternatives

Related tools to compare

FDA-cleared K251514

Overjet CBCT Assist

Overjet, Inc.

Authorized purpose: Dental and craniomaxillofacial CBCT segmentation, measurement and visualization support

Modality
CBCT
Anatomy
Dental/Maxillofacial
Decision
2025-12-05
FDA-cleared K232698

NemoScan

Software Nemotec S.L.

NemoScan supports dental CT or cone-beam CT visualization, segmentation, implant and surgical planning, instrument positioning, and guide planning from preoperative maxillofacial images.

Modality
CBCT
Anatomy
Dental/Maxillofacial
Decision
2024-01-18
FDA-cleared K250755

DS Core Diagnosis

Dentsply Sirona Inc.

Authorized purpose: Displays and supports interpretation of digital/digitized dental media, including CBCT and other 2D/3D X-ray images; its Panoramic Curve Proposal generates a proposed dental-arch curve for patients aged 12 years and older with permanent dentition that a clinician can review and adjust.

Modality
CBCT
Anatomy
Dental/Maxillofacial
Decision
2025-08-12
FDA-cleared K233925

Relu Creator

Relu BV

Authorized purpose: Relu Creator manages, transfers, displays, enhances, and analyzes dental and craniomaxillofacial image information and provides design input for dental solutions within the labeled workflow.

Modality
CBCT
Anatomy
Dental/Maxillofacial
Decision
2024-06-13

Correct this exact record

Copy this public context and add the field, proposed wording and original source before sending. Nothing here is submitted automatically. Form-specific prefill has not been verified.

Open existing correction destination

Permission to display a submission is not evidence verification. A submission enters editorial review; it does not approve a public change. Form availability, data entry, receipt, review and publication are separate steps. Data entry and receipt remain unverified.

Accepted repository change history

No entry has been added to this scoped change history for this record. This is not proof that the record never changed.

Correction policy and limits · Public repository change history