Authorized purpose: MAGNETOM Free.Max and Free.Star with syngo MR XA80A are 0.55T MRI systems for broad imaging and compatible interventions; this release adds dentomaxillofacial coil and assist functions plus reconstruction and energy-mode updates.
Clinical role
MRI acquisition, reconstruction, review, and release-specific workflow support.
Images and patients
MRI · Multi-region
Key limitation
Keep in mind: Depending on optional local coils configured with the system; when operated by dentists and dental assistants trained in MRI, the system must only be used for scanning the dentomaxillofacial region; interventional procedures use MR-compatible devices such as MR Safe biopsy needles.
Clinical detailsPurpose, workflow fit, evidence, and safety record
Workflow navigation pilot
Workflow role has not yet been reviewed for this navigation pilot.
A tag identifies a documented role; it does not establish compatibility or local acceptance. Methods and sources
What does this software do?Authorized purpose: MAGNETOM Free.Max and Free.Star with syngo MR XA80A are 0.55T MRI systems for broad imaging and compatible interventions; this release adds dentomaxillofacial coil and assist functions plus reconstruction and energy-mode updates.
Which images or clinical context are in scope?Modality: MRI Anatomy or clinical context: Multi-region Input: Patient MRI signal data acquired with supported coils and protocols.
Who uses it?Intended users: These images and the physical parameters derived from the images when interpreted by a trained physician or dentist trained in MRI yield information that may assist in diagnosis. When operated by dentists and dental assistants trained in MRI, the system must only be used for scanning the dentomaxillofacial region.
What does the software produce?Output: Transverse, sagittal, coronal and oblique cross-sectional images; other physical parameters derived from the images may also be produced.
What is its most important limitation?Key limitation: Depending on optional local coils configured with the system; when operated by dentists and dental assistants trained in MRI, the system must only be used for scanning the dentomaxillofacial region; interventional procedures use MR-compatible devices such as MR Safe biopsy needles.
Clinical takeaway. Clinical role: MAGNETOM Free.Max and Free.Star with syngo MR XA80A are 0.55T MRI systems for broad imaging and compatible interventions; this release adds dentomaxillofacial coil and assist functions plus reconstruction and energy-mode updates.
Evidence takeaway. Evidence from the reviewed source record: K251822 reports nonclinical system, coil, software, reconstruction, and image-quality testing plus a clinical investigation demonstrating adequate dentomaxillofacial image quality and safety in healthy volunteers and patients.
Evidence context
Evidence context not reviewed for this FDA record.
Public-label constraints
Label constraints have not been reviewed for this exact FDA record. Unknown is not all ages or evidence of unsuitability.
Public-label constraints, not patient-level eligibility or a medical recommendation. Training and evaluation populations are separate. Read the original labeling and confirm the exact release and protocol.
Purpose
MAGNETOM Free.Max and Free.Star with syngo MR XA80A are 0.55T MRI systems for broad imaging and compatible interventions; this release adds dentomaxillofacial coil and assist functions plus reconstruction and energy-mode updates.
Exact FDA submission
Checked 2026-09-19
Clinical-use display mirrors the exact FDA-supported purpose reconciled from the decision-summary packet.
These images and the physical parameters derived from the images when interpreted by a trained physician or dentist trained in MRI yield information that may assist in diagnosis. When operated by dentists and dental assistants trained in MRI, the system must only be used for scanning the dentomaxillofacial region.
Exact FDA submission
Checked 2026-09-19
The packet explicitly adds dentist and dental-assistant users for dentomaxillofacial scanning; the current user value omits that packet-specific group.
Depending on optional local coils configured with the system; when operated by dentists and dental assistants trained in MRI, the system must only be used for scanning the dentomaxillofacial region; interventional procedures use MR-compatible devices such as MR Safe biopsy needles.
Exact FDA submission
Checked 2026-09-19
This replaces the current generalized condition list with the packet's direct coil, dental-region, and interventional-device conditions.
K251822 reports nonclinical system, coil, software, reconstruction, and image-quality testing plus a clinical investigation demonstrating adequate dentomaxillofacial image quality and safety in healthy volunteers and patients.
Metrics are shown only when they are tied to a source, endpoint, population, and tested product version. Candidate literature without exact product and version linkage is not shown as product evidence.
Evidence summary
K251822 reports nonclinical system, coil, software, reconstruction, and image-quality testing plus a clinical investigation demonstrating adequate dentomaxillofacial image quality and safety in healthy volunteers and patients.
Sensitivity is not the primary endpoint for this acquisition, reconstruction, segmentation, guidance, or quantitative function. Use the task-specific evidence below.
Reported specificity
Not applicable
Not applicable
Not applicable
Checked 2026-09-03
Specificity is not the primary endpoint for this acquisition, reconstruction, segmentation, guidance, or quantitative function. Use the task-specific evidence below.
No contextualized exact-version metric has completed evidence review. Regulatory-document values, when available, are shown above with their limitations.
K251822 FDA performance package for MAGNETOM Free.Max; MAGNETOM Free.Star
DesignManufacturer nonclinical verification plus clinical dentomaxillofacial image-quality investigation
PopulationHealthy volunteers and patients undergoing dentomaxillofacial MRI plus broad supported 0.55T applications
Scopeexact submission
Tested versionMAGNETOM Free.Max and Free.Star with syngo MR XA80A
IndependenceSponsor or vendor study
K251822
Manufacturer evidence submitted for clearance or approval; local clinical, technical, and workflow acceptance remains necessary.
Recall and adverse-event records are shown only after product matching. Adverse-event reports do not establish incidence or causality.
Postmarket safety review
The 2026-09-02 openFDA device-recall snapshot contained no record matched to K251822 by exact submission identifier. This does not exclude product-family or later safety information.
Public source
Exact FDA submission
Checked 2026-09-03
Exact-identifier review does not prove absence of all product-family safety signals.
No separate named-product Medicare payment was identified in the reviewed CMS coverage material. Evaluate the product within the applicable imaging, procedural, or surgical service line and verify payer, site-of-service, and coding assumptions independently.
IT implementationDeployment, interfaces, data handling, and support
System and version relationships
Match the AI release, system build, configuration and region. Source documentation does not establish acceptance of an installed system.
No specific system/version pairing has completed review for this FDA record. A broad DICOM or product-family statement does not establish a named viewer build's support.
Public source context, not tested interoperability. Each hop needs its own release/configuration evidence. Missing or unavailable routes are not documented incompatibility. All local tests are planned, not passed; no installed-system acceptance is recorded.
Acquisition/source → routing → AI processing → returned objects → viewer/worklist/report → support owner
No specific route context has been source-reviewed for this record. Obtain both endpoint builds and documents; this is not a finding of incompatibility.
Acquisition/source
Source context, not route validation: Patient MRI signal data acquired with supported coils and protocols.
Scope: Exact FDA submission. Exact FDA decision-summary packet reviewed on 2026-09-19; existing wording is supported without expansion.
Confirm scanner/model, protocol, series completeness and both software builds.
Source context, not route validation: Scanner-console and DICOM workflow to PACS or downstream applications; validate worklist, identifiers, series labels, geometry, measurements, routing, and archive completeness.
Scope: Exact FDA submission.
Name gateways, destinations, transfer rules and failure visibility; a DICOM statement does not prove a route.
Source context, not route validation: Transverse, sagittal, coronal and oblique cross-sectional images; other physical parameters derived from the images may also be produced.
Scope: Exact FDA submission. The packet states cross-sectional images and derived physical parameters, not the current spectra and generic workflow-result wording.
Confirm object classes, units, references and whether findings, overlays or measurements reach their intended destination.
Unresolved route: Transverse, sagittal, coronal and oblique cross-sectional images; other physical parameters derived from the images may also be produced.
Scope: Exact FDA submission. The packet states cross-sectional images and derived physical parameters, not the current spectra and generic workflow-result wording.
Confirm the named viewer/worklist/report build, display behavior and report transfer. Output support alone does not establish this endpoint. The displayed source describes output, not validated end-to-end delivery.
Unresolved route: Not established for the exact route.
Scope: Scope not established.
Name the local, platform and AI supplier support owners and escalation path.
Planned local route tests
No tests below have been performed or accepted.
Patient/study identity (planned). Use approved non-patient test data to verify identifiers, accession and result-to-study linkage at every hop.
Study completeness (planned). Test missing views/series, partial transfer, late arrivals, priors and unsupported acquisition inputs; confirm explicit refusal or fallback.
Ordering and duplicates (planned). Send out-of-order, repeated and corrected studies; verify worklist order, deduplication and no misleading stale results.
Report transfer (planned). Verify output object types, annotations, units, report content, destination and availability of original images.
Access (planned). Verify authorized roles, audit trail, denied access and support ownership at each destination.
Latency and failures (planned). Agree a workload and turnaround target; test queues, timeouts, missing results and fallback reading.
Updates and rollback (planned). Define version change control, revalidation triggers, stop-use criteria and a tested rollback route.
Local implementation checklist
Agree the evidence and acceptance owner with your team and suppliers. Checkmarks apply to this page only and are not acceptance receipts.
Scanner-console and DICOM workflow to PACS or downstream applications; validate worklist, identifiers, series labels, geometry, measurements, routing, and archive completeness.
Only qualified mri technologists and physicians trained in magnetic resonance imaging. should operate or interpret the product. Local onboarding should cover the exact release, supported population, limitations, failure examples, escalation, downtime, and competency documentation.
Monitor by exact hardware, software and model version, patient population, anatomy, protocol, operator, input quality, output edits or overrides, failed studies, repeat acquisition or rework, downstream impact, downtime, incidents, recalls, and updates. Track these product-specific limits: Dental use is limited to dentomaxillofacial MRI by MRI-trained dentists or assistants under the labeling; exact coil, sequence, anatomy, intervention, and energy-mode conditions apply.
Scanner-console and DICOM workflow to PACS or downstream applications; validate worklist, identifiers, series labels, geometry, measurements, routing, and archive completeness.
exact submission · checked 2026-09-03
Test representative identifiers, orientation, geometry, measurements, units, routing, failure handling, and round trips locally.
Use a signed local test set for the supported population and workflow. Include common and difficult cases, exclusions, acquisition variation, failed or low-quality inputs, reviewer overrides, and downstream effects. Dental use is limited to dentomaxillofacial MRI by MRI-trained dentists or assistants under the labeling; exact coil, sequence, anatomy, intervention, and energy-mode conditions apply.
exact submission · checked 2026-09-03
Define stop-use, escalation, rollback, and revalidation triggers before production use.
Model capital and recurring cost against net staff time after review, throughput, repeat imaging or rework, room time, consumables, infrastructure, training, service, downtime, upgrade, and replacement costs.
product family · checked 2026-09-03
Vendor productivity claims are scenario inputs, not guaranteed local savings.
Monitor by exact hardware, software and model version, patient population, anatomy, protocol, operator, input quality, output edits or overrides, failed studies, repeat acquisition or rework, downstream impact, downtime, incidents, recalls, and updates. Track these product-specific limits: Dental use is limited to dentomaxillofacial MRI by MRI-trained dentists or assistants under the labeling; exact coil, sequence, anatomy, intervention, and energy-mode conditions apply.
exact submission · checked 2026-09-03
Revalidate after material software, hardware, model, protocol, interface, or clinical-policy changes.
Sources & review detailsFDA identity, research record, source ledger, and history
Regulatory identity
FDA record and catalog context
The FDA listing establishes the regulatory identity. It does not by itself establish local workflow fit, pricing, security, or performance in your environment.
This audit distinguishes completed source review from fields that have not yet been researched.
Exact FDA record reviewedStatus
2026-09-20Last searched
27Fields reviewed
12Source classes checked
0Screened PubMed leads
1Screened trial leads
0Unreviewed FDA recall leads
The refreshed discovery snapshot contains 0 PubMed and 1 ClinicalTrials.gov candidate record. Discovery metadata alone does not establish exact tested-product, version, population, and endpoint applicability, so all candidates remain quarantined and none was promoted. The current discovery snapshot contains 0 PubMed and 1 ClinicalTrials.gov candidate records; its dated, count-matched human screening remains current. Unlinked candidates remain quarantined. Native FDA recall identifiers produced 0 postmarket candidate records; 0 have been reviewed (0 published, 0 rejected) and 0 remain unreviewed.
Candidate leads were screened against the exact product and tested version. Unlinked records remain quarantined.
Source classes: fda ai list, fda decision summary, fda decision material, vendor product page, reimbursement policy, fda device recall, fda decision summary packet, literature index, trial registry, pubmed, clinical trials, openfda device recall
Field review details
Recorded state, verification date, notes and sources for fields without a publishable value. Conflicting records stay explicitly unsettled here; no plain settled value is shown for them.
Public pricing: Not publicly available - checked 2026-09-03 - Exact FDA submission
No public list price for the exact cleared configuration was found. Obtain a written quote separating hardware or license basis, enabled features, implementation, interfaces, infrastructure, training, service, upgrades, renewal, consumables, and exit costs.
Pricing model: Not yet reviewed
Setup and integration fees: Not yet reviewed
Recurring fees: Not yet reviewed
Minimum commitment: Not yet reviewed
Contract duration: Not yet reviewed
Renewal terms: Not yet reviewed
Cancellation terms: Not yet reviewed
Support and service terms: Not yet reviewed
Trial or pilot terms: Not yet reviewed
Data hosting location: Not yet reviewed
Data retention: Not yet reviewed
Documented data use: Not yet reviewed
Hardware requirements: Not yet reviewed
Network requirements: Not yet reviewed
Identity and access: Not yet reviewed
Security: Not verified - checked 2026-09-03 - Exact FDA submission
Public materials reviewed for this exact release do not establish the complete security posture. Request data-flow, identity, audit, encryption, retention, remote-access, vulnerability-management, backup, and incident-response evidence.
Authorized purpose: Vantage Fortian and Orian 1.5T produce diagnostic MR images of the head and body, including labeled noncontrast angiography, for trained technologists and physician interpretation.
Authorized purpose: S-scan Open is an Esaote MR system for diagnostic image acquisition, reconstruction, display, and professional interpretation within the labeled scanner, coil, sequence, and anatomy scope.
Authorized purpose: AIR Recon DL adds a deep-learning phase-correction and reconstruction option to supported GE 1.5T, 3T, and 7T MR workflows for all labeled anatomies and ages to reduce noise or ringing and support image quality or scan-time choices.
Authorized purpose: The listed MAGNETOM 1.5T and 3T MRI systems produce cross-sectional images, spectroscopic images or spectra, and derived physical parameters of the head, body, and extremities for trained-physician interpretation and can support imaging during MR-compatible interventions.
Copy this public context and add the field, proposed wording and original source before sending. Nothing here is submitted automatically. Form-specific prefill has not been verified.
Permission to display a submission is not evidence verification. A submission enters editorial review; it does not approve a public change. Form availability, data entry, receipt, review and publication are separate steps. Data entry and receipt remain unverified.
Accepted repository change history
No entry has been added to this scoped change history for this record. This is not proof that the record never changed.